Disassembly
2 - 14 Removing the 3G Module
2.Disassembly
Removing the 3G Module
3G Module Removal Procedure
1.
Turn
off
the computer, turn it over to remove the battery (
) and bottom cover (
2.
The module will be visible at point
on the mainboard (
).
3.
Carefully disconnect the cables
&
, and then remove the screw
from the module
(
)
.
4.
The module
).
5.
Lift the module
up and off the computer (
).
1
2
3
4
5
5
b.
c.
a.
2
1
5
3
4
5
d.
3.M2 SATA-1 Module
•
1 Screw
Figure 8
3G Module Removal
a. Locate the module.
b. Disconnect the cables
and remove the screw.
c. The module will pop up.
d. Lift the module up and
off the socket
Summary of Contents for N250WU
