26
English
PC Camera
Use the
Fn + F10
key combination to toggle power to the
PC Camera module. When the PC Camera is in use the PC
Camera LED will be illuminated (see
Camera App
Note that you need to use the
Camera app
in
Win-
dows
to take pictures and capture video.
1. Run the Camera app from the Start menu by clicking on the
Camera app
icon
in
All Apps
(you can type “camera” into
the search box to find the Camera app if it is not pinned to the
Start menu).
2. Click to select either
photo
or
video
mode.
3. Click the photo icon
to take a picture, and the icon will briefly
turn yellow as the picture is taken.
4. Click on the video icon
to start video capture (if video
capture begins a timer will appear at the bottom of the screen
and the icon will turn yellow).
5. To stop video capture click the video icon again.
6. Captured photos and videos will be saved to a Camera Roll
folder within the Pictures folder in This PC, and to the Photos
app stored in the Start menu.
Power Options
The
Power Options
(
Hardware and Sound
menu) con-
trol panel icon in
Windows
allows you to configure power
management features for your computer. You can con-
serve power by means of
power plans
and configure the
options for the
power button
,
sleep button (Fn + F12)
,
computer lid (when closed)
,
display
and
sleep mode
(the default power saving state) from the left menu. Note
that the
Power saver
plan may have an affect on computer
performance.
Click to select one of the existing plans, or click
Create a
power plan
in the left menu and select the options to cre-
ate a new plan. Click
Change Plan Settings
and click
Change advanced power settings
to access further con-
figuration options.
Figure 25
- Power Options
P95XHPxHRHQx CUG.book Page 26 Monday, September 25, 2017 11:30 AM
