Clevo P6x0Hx User Manual Download | Manualshive

Page: 18 / 368

background image

XVI

Preface

Developing Good Work Habits

Developing good work habits is important if you need to work in front of the computer for long periods of time.
Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or
other joints. The following are some tips to reduce the strain:

•

Adjust the height of the chair and/or desk so that the keyboard is at or slightly below the
level of your elbow. Keep your forearms, wrists, and hands in a relaxed position.

•

Your knees should be slightly higher than your hips. Place your feet flat on the floor or on
a footrest if necessary.

•

Use a chair with a back and adjust it to support your lower back comfortably.

•

Sit straight so that your knees, hips and elbows form approximately 90-degree angles
when you are working.

•

Take periodic breaks if you are using the computer for long periods of time.

Remember to:

•

Alter your posture frequently.

•

Stretch and exercise your body several times a day.

•

Take periodic breaks when you work at the computer for long periods of time. Frequent
and short breaks are better than fewer and longer breaks.

«
...
16
17
18
19
20
...
»

Summary of Contents for P6x0Hx

















































































































































































































































































































































































Reviews:

No comments

Related manuals for P6x0Hx

Brand: Samsung Pages: 143

Brand: Samsung Pages: 122

Brand: Packard Bell Pages: 83

Latitude 12 Rugged Extreme 7214

Brand: Dell Pages: 111

Brand: Dell Pages: 68

1526 - Inspiron - Laptop

Brand: Dell Pages: 51

1720 - Vostro - Core 2 Duo 2.2 GHz

Brand: Dell Pages: 66

1737 - Studio - Laptop

Brand: Dell Pages: 47

Brand: HP Pages: 96

Brand: HP Pages: 126

Brand: HP Pages: 116

Brand: HP Pages: 70

Brand: HP Pages: 124

Brand: HP Pages: 162

Brand: HP Pages: 70

Brand: HP Pages: 86

Brand: HP Pages: 62

Brand: HP Pages: 105

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands