Clevo P6x0Hx User Manual Download

Page: 232 / 368

Modules

6 - 74 Trusted Platform Module

Enabling & Managing TPM

Restart the computer.

Enter the

Aptio Setup Utility

pressing

during the POST/startup.

Use the arrow keys to select the

Security

menu.

Select

TPM Configuration

and press Enter to access the sub-menu.

Press Enter under

Security Device Support

menu and select

Enable

You will then need to press

to save the changes and restart the computer.

You can now manage the TPM from

Windows



Clearing TPM

Information

If you need to clear ex-
isting TPM information
then select

Pending

Operation

in the

Secu-

rity Device Support

menu, and select

TPM

clear

, and then press

to save the configuration
changes and restart the
system.

Figure 6 - 52

TPM State (Enable)

Summary of Contents for P6x0Hx

















































































































































































































































































































































































Search results

Summary of Contents for P6x0Hx

Reviews:

Related manuals for P6x0Hx

Brands by name

Popular brands

Clevo P6x0Hx, User Manual

Search results

Summary of Contents for P6x0Hx

Reviews:

Related manuals for P6x0Hx

Brands by name

Popular brands