Clevo P6x0Hx User Manual Download

Page: 306 / 368

Control Center & Flexikey®

B - 42 Mouse Settings - Express Text

Mouse Settings - Express Text

A mouse button click can be set to send a string of text within any application using

Express Text

Enable

and select the mouse under your chosen profile, click on a mouse button to select it, and then click to

select

Express Text

Action Type

Click in

Start

key if required (the

Start

key is the key used to in your target program to open a text message), or

you can leave it blank if you prefer.

Click in the

Text Context

field and type in your message.

Figure B - 34

- Mouse - Express Text

Summary of Contents for P6x0Hx

















































































































































































































































































































































































Search results

Summary of Contents for P6x0Hx

Reviews:

Related manuals for P6x0Hx

Brands by name

Popular brands

Clevo P6x0Hx, User Manual

Search results

Summary of Contents for P6x0Hx

Reviews:

Related manuals for P6x0Hx

Brands by name

Popular brands