Clevo P6x0Hx User Manual Download | Manualshive

Page: 8 / 368

background image

VI

Preface

IMPORTANT SAFETY INSTRUCTIONS

Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury
to persons when using any electrical equipment:

1.

Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet

basement or near a swimming pool.

2.

Avoid using this equipment with a telephone line (other than a cordless type) during an electrical storm. There
may be a remote risk of electrical shock from lightning.

3.

Do not use the telephone to report a gas leak in the vicinity of the leak.

4.

Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special disposal instructions.

5.

This product is intended to be supplied by a Listed Power Unit as follows:

•

For Design I Series

- AC Input of 100 - 240V, 50 - 60Hz, DC Output of 19.5V, 11.8A (

230

Watts) minimum AC/DC Adapter.

•

For Design II Series

- AC Input of 100 - 240V, 50 - 60Hz, DC Output of 19V, 10.5A (

200

Watts) minimum AC/DC Adapter.

«
...
6
7
8
9
10
...
»

Summary of Contents for P6x0Hx

















































































































































































































































































































































































Reviews:

No comments

Related manuals for P6x0Hx

Brand: Panasonic Pages: 80

Brand: XMG Pages: 23

TravelMate 4210

Brand: Acer Pages: 84

Brand: Clevo Pages: 104

Brand: MSI Pages: 86

Brand: Clevo Pages: 82

TravelMate 660 series

Brand: Acer Pages: 98

TravelMate 650 Series

Brand: Acer Pages: 98

TravelMate P643-V

Brand: Acer Pages: 244

TravelMate P633-V

Brand: Acer Pages: 228

TRAVELMATE TravelMate 2350

Brand: Acer Pages: 90

Brand: Samsung Pages: 77

Brand: Samsung Pages: 83

Galaxy Book3 360

Brand: Samsung Pages: 121

Brand: Samsung Pages: 102

Galaxy Book Pro NP935XDB-KC1UK

Brand: Samsung Pages: 105

Brand: bto Pages: 256

Brand: Lenovo Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands