Clevo P6x0Hx User Manual Download

Page: 302 / 368

Control Center & Flexikey®

B - 38 Mouse Settings - Express Key

Mouse Settings - Express Key

To assign a mouse button click to send multiple key combinations (an external mouse must be attached), or to
create more useful shortcut keys, use

Express Key

Enable

and select the mouse under your chosen profile, click on a mouse button to select it, and then click to

select

Express Key

Action Type

In the following example we will configure the central mouse wheel to combine the actions of

left shift

key for

sprinting, and the

key for moving forwards in a game program.

Click on the central mouse wheel for the shortcut action.

Figure B - 31

- Mouse - Express Key Record Key Combination (Mouse)

Summary of Contents for P6x0Hx

















































































































































































































































































































































































Search results

Summary of Contents for P6x0Hx

Reviews:

Related manuals for P6x0Hx

Brands by name

Popular brands

Clevo P6x0Hx, User Manual

Search results

Summary of Contents for P6x0Hx

Reviews:

Related manuals for P6x0Hx

Brands by name

Popular brands