Disassembly
Removing the M.2 SSD Module 2 - 15
2.Disassembly
Removing the M.2 SSD Module
M.2 SSD-1 Removal Procedure
1. Turn
off
the computer, remove the battery (
), and keyboard (
).
2. The M.2 SSD module will be visible at point
on the mainboard (
).
3. Remove the screw
(
).
4. The M.2 SSD module
) will pop-up, and you can remove it from the computer.
5. Reverse the process to install a new module (do not forget to replace the screws and thermal pad).
1
2
3
b.
c.
a.
1
SATA/PCIE SSD
2
3
3
Thermal Pad
Make sure to place the
thermal pad’s adhesive
side down on the module’s
surface as illustrated.
3.M2 SSD Module
• 1 Screw
Figure 11
M.2 SSD-1 Module
Removal
a. Locate the M.2 SSD.
b. Remove the screw.
c. The M.2 SSD module
will pop up.
Summary of Contents for PD70PNN
