Disassembly
Removing the Keyboard 2 - 7
2.Disassembly
Removing the Keyboard
Keyboard Removal Procedure
1. Turn
off
the computer, remove the battery (
).
2. The keyboard adhesive mylar will be visible at point
on the computer. Pull the adhesive mylar
out to release
the keyboard (
a
).
3. Open it up with the LCD on a flat surface before pressing at point
to release the keyboard module (use the spe-
cial eject stick
to do this) while releasing the keyboard in the direction of the arrow
as shown (
b
).
1
2
3
4
5
a.
3
4
5
b.
1
2
2
4. Eject Stick
Figure 3
Keyboard Removal
a. Remove the adhesive
mylar from the keyboard.
b. Use a special eject stick
to push the keyboard out
while releasing the key-
board as shown.
Summary of Contents for PD70PNN
