Disassembly
2 - 14 Removing and Installing a Processor
2.Disassembly
Processor Installation Procedure
1.
Insert the CPU
), pay careful attention to the pin alignment, it will fit only one way (DO NOT
FORCE IT!), and turn the release latch
towards the lock symbol
).
2.
Remove the sticker
(
) from the heat sink unit.
3.
Insert the heat sink
as indicated in
.
4.
Tighten the CPU heat sink screws in the order
,
&
(the order as indicated on the label and
).
5.
Replace the CPU fan, component bay cover and tighten the screws (
A
B
C
D
1
2
3
b.
B
a.
D
Note
:
Tighten the screws in the order as
indicated on the label.
A
c.
d.
1
2
3
C
D
Figure 10
Processor
Installation
a. Insert the CPU.
b. Turn the release latch to-
wards the lock symbol.
c. Insert the heat sink.
d. Tighten the screws.
A. CPU
D. Heat Sink
•
3 Screws
Summary of Contents for W540SU1
