Disassembly
Removing the Hard Disk Drive 2 - 7
2.Disassembly
Removing the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
or 7mm (h). Follow your operating system’s installation instructions, and install all necessary drivers and utilities (as
outlined in
Chapter 4 of the User’s Manual
) when setting up a new hard disk.
Hard Disk Upgrade Process
Figure 3
HDD Assembly
Removal
a. Remove the screws.
b. Remove the component
bay cover.
3. Component Bay
Cover
•
2 Screws
1.
Turn
off
the computer, and remove the battery (
2.
Locate the component bay cover and remove screws
-
)
.
3.
Slide the component bay cover
until the cover and case indicators
are aligned (
).
1
2
3
4
1
b.
3
a.
2
4
4
Summary of Contents for W650SJ
