background image

3

• Do not operate any 

appliance with a damaged 

cord or plug or after the 

appliance malfunctions, or 

has been damaged in any 

manner.

• If the supply cord 

is damaged, it must 

be replaced by the 

manufacturer, its service 

agent or similarly 

qualified persons in order 

to avoid a hazard.

• Children should be 

supervised to ensure that 

they do not play with the 

appliance.

• Do not use appliance for 

other than intended use.

• Do not disassemble, repair 

or re-form the unit, it may  

cause injury, fire or other  

malfunctions. A qualified  

service agent must make  

all service adjustments.  

Unauthorised 

disassembling of the 

product will void  

the warranty.

• Unplug from outlet when 

not in use and before 

cleaning. Never plug in 

or unplug unit with wet 

hands. 

• Do not use unit outdoors 

or expose to greasy  

or damp environments.

• Keep the rear air inlet 

and outlet free from air 

blocking materials such 

as clothing, plastic bags  

or papers. Air flow  

is required for the unit  

to operate effectively.

• Place unit on a flat 

location at least 30cm 

from wall or other 

appliances.

• When the unit is in 

operation, keep all body 

parts, jewellery, hair and 

loose clothing away from 

the openings

• Unit must be placed  

on a stable flat surface to 

reduce possible excessive 

vibration and noise.

Summary of Contents for CLI-AH201













Reviews: