background image

Your Aquaport 12 Month Repair or Replacement Warranty

 Aquaport warrants this appliance to the first purchaser and subject to 
the stated conditions:
Warranty covers any defects in material or workmanship in the 
manufactured product within the first twelve months from the date of 
purchase.
To make a warranty claim you must call Aquaport on toll free number 
1300 764 325 for instructions.
If a product is found to be faulty there is a 90 day return policy 
from the date of purchase. Product returned to store MUST be 
accompanied by a valid proof of purchase and Customer Reference 
number received from Aquaport. Call 1300 764 325.
For warranty claims outside of 90 days from date of purchase, product 
will be repaired or replaced at our discretion. Repair or replacement 
costs of the product will be covered under warranty by Aquaport.
Goods presented for repair may be replaced by refurbished goods of 
the same type rather than being repaired. Refurbished parts may be 
used to repair the goods.
Warranty does not cover filter cartridge which is a consumable 
unless proven to have defects in material or workmanship in the 
manufactured product.
Our goods come with guarantees that cannot be excluded under 
the Australian Consumer Law. You are entitled to a replacement or 
refund for a major failure and compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to have the goods 
repaired or replaced if goods fail to be of acceptable quality and the 
failure does not amount to a major failure. Register your warranty 
online at 

www.aquaport.com.au/warranty

Conditions Of This Warranty:

1.  This product has been fully installed in accordance with the  

 

 

user manual installation instructions.

2.  The warranty extends only to repairing or replacing    

 

 

any component that proves to be defective in material 

 

or workmanship.

3.  The warranty does not cover defects occasioned by misuse,  
 

alterations, accidents, or used for other than the intended  

 purpose.
4.  The warranty does not cover damage to the product caused by  
 

accident, fire, or floods.

5.  Proof of purchase is required for warranty claims.
 

Please keep purchase receipt in a safe place.

To enable us to register your warranty and provide service should a 
problem occur, we recommend you register your warranty online at 

www.aquaport.com.au/warranty

Aquaport Corporation Pty Ltd
5 John Street Flinders Park,  
South Australia 5025 

 

       

Customer Care 1300 764 325

Summary of Contents for CLI-DH12

















Reviews: