background image

9

© 2008 Directed Electronics. All rights reserved.

What’s included

/NElVEBUTTONWAY3UPERCODE2ESPONDER,#2EMOTE#ONTROL

s

/NElVEBUTTONWAY3UPERCODECOMPANIONREMOTE

s

The control module

s

#ONTROLCENTERWITHINTEGRATEDSTATUS,%$AND6ALETOVERRIDESWITCH

s

A remote start defeat toggle switch

s

Window decals

s

Your warranty registration

s

Important information

Congratulations on the purchase of your state-of-the-art remote start system. Due 

TOTHECOMPLEXITYOFTHISSYSTEMITMUSTBEINSTALLEDBYANAUTHORIZEDDEALERONLY

Installation of this product by anyone other than an authorized dealer voids the 
warranty. All dealers are provided with a preprinted dealer certificate to verify 
authorization.

"Y CAREFULLY READING THIS /WNERS 'UIDE PRIOR TO USING YOUR SYSTEM YOU
WILL MAXIMIZE THE USE OF THIS SYSTEM AND ITS FEATURES 9OU CAN PRINT AD

-

ditional or replacement copies of this manual by accessing our web site at  
www.directed.com.

¢

 Your warranty

Your warranty registration must be completely filled out and returned within 10 
days of purchase. Your product warranty will not be validated if your warranty 
registration is not returned. Make sure you receive the warranty registration from 
your dealer. It is also necessary to keep your proof of purchase, which reflects 
that the product was installed by an authorized dealer.

¢

 Replacement remote controls

9OURSYSTEMCOMESWITHONE2ESPONDER,#REMOTECONTROL0.

 

7752X) and 

ONECOMPANIONREMOTECONTROL0.8 )FADDITIONALREMOTESAREDESIRED

please see your authorized dealer or visit 

www.directedstore.com

 to order.

Summary of Contents for 20.7





















































Reviews: