3
© 2015 Directed. All rights reserved.
Car Finder
When the engine is OFF, press and hold the remote control button for
three seconds. The horn sounds once (if connected) and the parking
lights flash multiple times. The 2-way remote control emits a single tone.
Using Remote Start
This feature allows you to remotely start and run your vehicle for a
programmable period of time. This makes it possible to warm up the
engine, and adjust the interior temperature of the vehicle with the cli-
mate control system. If interior heating or cooling is desired, the climate
controls must be preset, and the fan blower must be set to the desired
level prior to remote starting the vehicle.
Important!
(1) Never remotely start the vehicle with the
vehicle in gear, and (2) Never remotely start the vehicle
with the key in the ignition.
Starting the Engine:
1. Make sure the parking brake is set. Press and release the remote
control button once* (or the amount of times the system has been
programmed to activate the remote start).
2. The engine will START and the parking lights will turn on. The
2-way remote will also emit tones.
The parking lights stay on as visual confirmation while the engine is
ON. The default runtime is 12 minutes and can be shortened or ex-
tended by the installer. If a remote start configuration issue prevents the
engine from starting, the parking lights flash a remote start fault report
to identify the fault. See "Remote Start Faults" on page 8.
Summary of Contents for 4811X
Page 23: ......
Page 24: ...Manuel D Utilisation ...
Page 47: ......
Page 48: ...Guía Del Propietario ...
