background image

  Re set All Fea tures  

If you wish to reset all the user-selectable features to their normal factory presets, you can do so simply by choosing the

 Reset all features

 selection (column

1, row 7) on the 

Table of User-Selectable Features

. If you do so, all features — except the programmed remote controls and your valet code — will be  reset

to the factory settings that are indicated in 

BOLD

 type on the 

Table of User-Selectable Features

. To reset all remote controls, use the 

Clear all remotes

 feature 

in column 2, row 6. To reset your valet code, use the 

Set a new secret valet code

 feature in column 2, row 7.

Ta ble of User- Selectable Fea tures

Feature Select

1 blank press

2 blank presses

3 blank presses

4 blank presses

1

 ✱

 press

Add a new remote control

NOTE 1

Chirps: off/on/quiet

(1/2/3 chirps)

AutoArming: off/on

NOTE 5  — Other vehicle‘s remote:

arm/disarm (1 then 2 chirps)

2

 

 presses

Personalized Siren Sounds*

NOTE 2

NOT USED

Lock upon AutoArming: off/on

NOTE 6 — Other vehicle‘s remote:

trunk release* (2 chirps)

3

 

 presses

Play Personalized Siren Sounds*:

trigger only/always (1/2 chirps)

Remote valet mode via

button combo 

 + 

: off/on

AutoArming entry delay: off/on

NOTE 6  — Other vehicle‘s remote:

silent arm and disarm (3 chirps)

4

 

 presses

Siren duration: 30 /60/90sec.

(1/2/3 chirps)

AutoStart*: both off/both on/temp

only/battery only (1/2/3/4 chirps)

FACT: off/on

NOTE 6 — Other vehicle‘s remote:

remote engine starting* (4 chirps)

5

 ✱

 presses

AutoLock: off/on

NOT USED

NOT USED

NOTE 6 — Other vehicle‘s remote:

timed headlight activation* (5 chirps)

6

 

 presses

AutoUnLock: off/on

Clear all remotes

NOTE 3

NOT USED

NOTE 6 — Other vehicle‘s remote:

window rolldown/venting* (6 chirps)

7

 

 presses

Reset all features (except remotes

and valet code) to factory settings

Set a new secret valet code

NOTE 4

NOT USED

NOTE 6 — Other vehicle‘s remote:

remote valet mode (7 chirps)

* Re quires op tional wir ing or ac ces sory; ask your Clif ford Dealer for de tails.

NOTE 1: Press the 

 button of the new remote. You’ll hear one chirp. Press the 

 button again. You’ll hear two

chirps to confirm that the new remote control has been added.

NOTE 2: This feature requires the optional Self-Powered SmartSiren 4. If so equipped, selection of  this feature will

cause the system to sound a few seconds of siren sound #1. Press the blank button to turn on this sound or the 

 button 

to turn it off. It will then sound a few seconds of sound #2. Repeat: blank=ON, 

=OFF for each of the six sounds.

NOTE 3: You’ll hear two chirps to indicate all remotes have been cleared from memory. You must now  add
new/existing remotes with the “Add new remote control” feature and/or the “Other vehicle‘s remote”  feature.

NOTE 4: Immediately PRESS THE BLANK BUTTON, THEN enter your new code, wait for the two chirps, then turn off the
ignition (you’ll hear 3 chirps to confirm program mode exit). You MUST now turn the ignition back on and then

re-enter your new code. If the LED flashes on, your new code has been accepted. If the LED does not light, the two
codes did not match and the system has reverted to your previous code. 

NOTE 5: Lets you arm/disarm with the remote control of a G4 system on your other vehicle(s). For instance, to set the 

✱ 

button of the other car’s remote to arm and disarm this system, select column 4, row 1, then press the 

 button of the

other car’s remote (you’ll hear one chirp). Immediately press the 

 button again (you will hear a 2-chirp

confirmation). The 

 button of the other vehicle’s remote will now arm/disarm this system.

NOTE 6: The features in this column allow you to control your system with the remote control of a G4 system on your
other vehicle(s). Just select the function you wish, then press the unused button or button combination on the other

remote that you want to use to perform that function on this system (you will then hear a the chirps noted). NOTE: You
must first set a button or button combination on the other car’s remote that will arm/disarm the system  (column 4, row

1) before these others will be accepted.

Life time lim ited fac tory war ranty terms & con di tions

Clif ford ve hi cle se cu rity sys tems and ac ces so ries re quire pro fes sional in stal la tion  by an Authorized Clif ford Dealer. Un less the sys tem is sold and in stalled by an

Authorized Clif ford Dealer, all prod uct war ran ties and guar an tees are void. As the manu fac turer, Clif ford Elec tron ics war rants to the origi nal con sumer

pur chaser, the sys tem con trol unit and re mote con trols to be free from de fects in ma te rial  and work man ship for as long as you own the ve hi cle in which the

sys tem was origi nally in stalled. All other parts of the sys tem and ac ces so ries to the sys tem are war ranted to be free from de fects in ma te rial and work man ship for

one (1) year from the date of pur chase. Clif ford Elec tron ics will re pair or re place, at its op tion and free of charge dur ing the war ranty pe riod, any sys tem

com po nent that proves de fec tive in ma te rial or work man ship un der nor mal in stal la tion, use, and serv ice, pro vided the prod uct is re turned to our fac tory by an

Authorized Clifford Dealer, trans por ta tion charges pre paid. Prod ucts re turned to our fac tory must be ac com pa nied by a pho to copy of the pur chase re ceipt. In

the ab sence of such pur chase re ceipt, the war ranty pe riod shall be one (1) year from the date  of manu fac ture. Any dam age to the prod uct(s) as a re sult of mis use, 

abuse, ne glect, ac ci dent, in cor rect wir ing, im proper in stal la tion, de struc tion or al tera tion of the se rial number, re pair or al tera tion out side our fac tory, or any

use vio la tive of in struc tions fur nished by us will void the war ranty. This war ranty is lim ited to de fec tive parts and spe cifi cally ex cludes any in ci den tal or

con se quen tial dam ages con nected there with. This warranty is not transferable. Clif ford Elec tron ics makes no war ranty against theft. This war ranty is not to be

con strued as an in sur ance pol icy against loss. War ranty on in stal la tion la bor, re moval and re in stal la tion charges are not the re spon si bil ity of Clif ford

Elec tron ics, Inc.

9

Summary of Contents for ACE 4000










Reviews: