background image

Standard Features of the Remote Keyless Entry System

✔ 

Lifetime Warranty

 — This is one feature you may never use since Clifford

systems are renowned for their reliability. For as long as you own the
vehicle, Clifford Electronics will repair or replace the control unit and
remotes free of charge.

A Pair of 3-Button/3-Channel Remote Controls

 — These user-friendly

keychain remote controls give you fingertip command of all convenience
features from a typical range of 100 feet.*

✔ 

Remote Door Locking/Unlocking

—No more fumbling with keys in the

dark or bad weather. Just a press of a button locks or unlocks the doors for
you and your passengers.

Visual Confirmation

—When you remotely lock or unlock the doors, the

Remote Keyless Entry System will confirm their status by flashing the
parking lights.

AutoLock™/AutoUnlock™

— For your safety, when you begin driving, all

your vehicle’s doors automatically lock. Conversely, the doors automatically
unlock when you park your car.

Remote Controlled Courtesy Lighting

—When you remotely unlock the

doors, the interior lights automatically turn on and stay on until you start the
engine or for 30 seconds, whichever occurs first.

Interface for Factory-Installed Theft Deterrent Device

—If your vehicle

has a factory-installed, non-remote control, theft deterrent device, the
Remote Keyless Entry System turns it into a remote controlled car alarm! So
when you remotely lock/unlock your vehicle’s doors, the Remote Keyless
Entry System will automatically arm/disarm your theft deterrent system.

Remote Trunk Release Capability

—Allows you to activate the trunk

release from up to 100 feet* away. To prevent unintentional activation, an
electronic interlock assures that the trunk release may be remotely activated
only when the vehicle’s doors are unlocked (may require an optional relay). 

Remote Headlight Activation Capability

—A single press of a button on

your remote control will turn on the headlights for 15 seconds to light your
way to and from your vehicle (may require an optional relay).

Additional Outputs for More Optional Accessories

—Use them for

remote controlled accessories such as power window control, memory seat
activation or remote engine starting.

* Some countries require less range.

2

Summary of Contents for AUTO SECURITY













Reviews: