background image

Stan dard Fea tures of the Smart Re mote Starter III 

(cont.) 

q

Cold Weather Cranking

 — Automatically cranks the engine for up to 10

seconds or until it starts, whichever occurs first. If the engine does not start, or
starts and then stalls, your Smart Remote Starter III will automatically try to
restart the engine up to two additional times.

q

AutoShutDown™

—  The Smart Remote Starter III automatically shuts down the

engine after 30 minutes if the vehicle is left unattended.

q

StarterGuard™

—  Prevents grinding of the starter if you inadvertently turn the

ignition switch to the starter position while the engine is running under the
control of your Smart Remote Starter III.

q

Remote Door Locking/Unlocking

— A press of a button on the Smart Remote

Starter III remote control from up to 300 feet away will lock all the vehicle
doors. Remote door locking is visually confirmed by two flashes of the parking
lights. Press again and the doors will unlock, which is confirmed with a single
parking light flash.

q

AutoLock and AutoUnLock

— For your safety when you begin driving, all the

doors automatically lock. Conversely, the doors automatically unlock when you
park and turn off the ignition. If you prefer, you may turn off one or both of these 
features via program mode.

q

ShortStop Mode

 — Now you don’t need to shut off the engine when leaving

your car parked for a few moments (such as when stopping at a convenience
store or making a delivery). Just press button 2 while the engine is still running
and you can remove the keys, exit, and remotely lock the doors without shutting
down the engine.

q

AutoStart™ Battery Mode

 — Never again will you return to a dead car battery.

Whenever you wish, just a press of a button on your remote control sets the
system to continually monitor the vehicle battery while you are away. If the
battery’s voltage drops below a preset level, the system will automatically start
the engine and recharge the battery (to conserve battery power, the Smart Remote 
Starter III will not activate the parking lights or any preset accessories in this
mode). Likewise, the system automatically shuts down the engine once the
battery is properly charged or after 30 minutes, whichever occurs first. If needed,
the process will repeat every eight hours until the battery is properly charged.
AutoStart is automatically canceled as soon as you drive your car.

3

Summary of Contents for III

















Reviews: