8
remote start/shutdown procedure
Press button
on the remote control (if your G4/G5 system is so
equipped) or button 4 on the remote:
z
Two parking light flashes confirm startup initiation.
z
The engine and preset accessories (air conditioner, heater,
etc.) will start and run.
z
While idling, the parking lights stay on* for ongoing visual
confirmation.
When idling under the control of your IntelliStart 4, you may shut down
the engine by pressing the
button again.
to drive after remote starting
1. Disarm, enter, but don’t touch the brake or transmission.
2. Insert your key and turn the ignition switch all the way on.
3. Press the brake. Your vehicle will now operate normally.
* Except on some UK systems.
