background image

Standard Features of the Tazor II 

(cont.)

Patented Malfunction AutoBypass™

 —In the unlikely event of a trigger or

sensor malfunction, your Tazor II will automatically bypass the malfunction and
arm all other points to continue relentless protection of your vehicle.

TotalRecall™

 — Tazor II’s non-volatile memory automatically stores the identity

of the last activated trigger or sensor activated while the system was armed.

User-Selectable AutoArming™

— Automatically arms itself “passively” if you

forget. May qualify you for an insurance discount that could pay for the system
(consult your insurance company).

AutoArming Enable/Disable

— You may disable or re-enable AutoArming

with just a few flicks of a switch.

AutoArm & Lock™

— You may set the system to automatically lock the doors

every time the system AutoArms.

Instant AutoArm Bypass

— Just two quick turns of the ignition switch will

bypass AutoArming for one cycle — perfect when fueling the vehicle. The
AutoArming feature is automatically restored the next time you park your car.

High-Output Siren

 — Loud siren wail for 30 seconds when the alarm detects an

intrusion attempt. The system then automatically resets and rearms.

Patented Remote Control Code Learning

 — Just a few flicks of a switch lets

you match to the system up to 4 different 2-button/3-channel Clifford remote
controls. Just as easily, a lost or stolen remote control can be deleted.

Advanced CMOS Microcomputer

 —Very large scale integration (VLSI)

microprocessor commands and monitors all system functions more than
1,000,000 times per second, yet it draws less power than the vehicle’s clock.

Dual-Level Tampering Warning

 — You may set your Tazor II to issue a rapid

five-chirp warning whenever it detects any tampering. If there is any further
tampering, or if the hood, trunk or a door is opened at any time, Tazor II will
sound a continuous siren blast.

Fault-Proof Starter Interrupt

 — The system electronically prevents an intruder

from starting the engine while the system is armed.

Hood/Trunk Trigger Input

— For full perimeter protection of the engine

compartment and trunk contents (may require optional pin switches).

High-Luminescence LED Status Indicator

 — Adds visual deterrence and

identifies system status.

Secured Valet Mode

 — Permits vehicle servicing and valet parking without

relinquishing the remote control.

Patented SmartPowerUp™ II

 — When power to the system is disconnected, the

system’s non-volatile memory always remembers the last state (armed, disarmed
or valet mode) and returns to that state when power is restored. So if a thief
disconnects the power and then restores it in an attempt to start the car, the
system will re-arm and instantly sound the siren while immobilizing the vehicle.

2

Summary of Contents for Tazor II









Reviews: