Automatic malfunction bypass
The system automatically bypasses any faulty point and arms all other triggers and
sensors to provide the utmost protection until you can have the system serviced.
Prior intrusion attempt alert
If you hear three chirps when you remotely disarm, the alarm sounded in your absence.
FACT™— False Alarm Control and Test
With FACT, you’ll never experience repeated false alarms. If the siren goes off, DO
NOT remotely disarm the system; allow it to run for the full 30 seconds. Before
sounding a second time, the system checks for another activated trigger to verify an
intrusion is in progress. If the siren sounds again, you will know for sure that
someone is tampering with your vehicle.
Dual-level tamper warning
You may set the system to issue a rapid five-chirp warning, instead of the full alarm,
whenever the system detects tampering. If there is any further tampering, or if a door,
the hood or the trunk is opened at any time, your system will sound the full alarm.
Fault-Proof starter interrupt
Your Tazor II will automatically prevent the engine from being started while the
system is armed. Clifford’s Fault-Proof design ensures that you can start the engine
even in the unlikely event of a system malfunction.
High-output siren
Loud siren wail when the system detects an intrusion. Your Tazor II also has remote
controlled chirp muting that is valuable when parking late at night in a quiet
residential area or any time when you want to arm or disarm silently. To do so,
simply press both buttons I+II on your remote control instead of the usual button I.
SmartPowerUp™ II
If power to the system is ever removed, SmartPowerUp II ensures the system will
automatically restore itself to its previous state when power is restored. So if a thief
disconnects the power and then restores it in an attempt to start the car, the system
will re-arm and instantly sound the siren while immobilizing the vehicle. If your
vehicle is to be serviced by a mechanic, just put the system in valet mode. If the
mechanic needs to interrupt power, your system will automatically return to its valet
mode state when power is restored; there will be no alarm activation and no need to
provide your mechanic with your remote control and instructions on how to use it.
5
