ClimaCheck Gateway NX400 Hardware Manual
–
2020-03-26 Page 32 of 41
4.8
Mobile tab
The Mobile tab contains all settings for APN, PIN code, User ID, password and other settings for
the built-in modem. Read the present settings in the Gateway unit with the Fetch button and write
settings to the unit with the Apply button.
Figure 21 Mobile tab and PIN Code window
Default settings with APN for the SIM card provided by ClimaCheck can be seen in Figure 21. To
use a different SIM-card follow the instructions below.
•
Unlock the configurator with the user password, see section 4.2
•
Go to the Mobile tab
•
Press Fetch to read the present configuration
•
Enter APN for the new card
•
Enter User ID and Password if this is required by the operator
•
Press PIN Code and enter PIN code in the new window, leave empty if PIN code is disabled.
•
Press Apply and then Close to go back to Mobile tab.
•
Press Apply to store settings in the Gateway
•
Got to Action and Restart Device
The Gateway will reboot and connect with the new settings. If the communication is changed from
LAN or WiFi to Mobile, the selected network interface needs to be changed. This is done from the
menu in the internal application, see section 3.11, or with DIP-switches, see section 5.2.
4.9
LAN 1 tab
LAN 1 tab contains settings for the ethernet/LAN connection. Read the present settings in the
Gateway with the Fetch button and write settings to the unit with the Apply button.
Default settings (Obtain IP address from DHCP server) can be seen in Figure 22. To change
settings follow the instructions below.
•
Unlock the configurator with the user password, see section 4.2
•
Go to the LAN 1 tab
•
Press Fetch to read the present configuration
•
Enter settings for the Network the Gateway is connected to
