13
4. After the completion of pumping, the LCD screen shows the temperature (in degree Celsius). In a
stable environment, the temperature of the air measured by the Autovac2 at the mouth of the bottle and
the exact temperature of the wine should not be more than 2°C difference. Press the easy-touch button
once to show the day count, and once more, in turn, to show the temperature (in degree Fahrenheit).
The day count will increase by 1 in every 24 hours (maximum count is 19).
5. The preserver will continuously detect the pressure inside the wine bottle and restart pimping if
significant air leakage is detected. This will keeps the wine bottle in vacuum state.
6. To remove the Autovac2, press the button in the middle.
IMPORTANT: the preserver comes with a tilting detector to prevent spillage affecting the
functioning of the preserver. When the wine bottle tilts up to 45 degrees, the tilting is detected by
the sealer, the pumping process automatically stops, with the LCD displays showing below. Once
the bottle positioned back to normal, then the pumping process resumes.
Battery exchange display:
If there is low battery, the LCD screen displays message as below. To replace batteries (
cf. “Inserting
the batteries” chapter), just open the battery cover by turning anti-clockwise as shown of the lid, and
insert 2 x AAA batteries according to the indication on the metal plate, and turn back the lid until the
curve of the lid matched the body.
NOTE: it’s recommended to remove batteries from your appliance if you will not use it for a long
time, in this way you will reinforce life time of batteries.
5. CLEANING
1. Wipe the exterior parts with a soft and dry rag.
2. Do not use abrasive sponge.
Note: do never use alcohol or solvent to clean the appliance. Do never immerse the appliance in
water or any other liquid.
