30
Attention:
•
Store wine in sealed bottles.
•
Do not overload the cabinet.
•
Do not open the door unless necessary.
•
Do not cover shelves with aluminum foil or any other shelf material which may prevent air circulation.
Should the wine cooler be left empty for long periods it is suggested that the appliance is unplugged, and after careful
cleaning, leave the door ajar to allow air to circulate inside the cabinet in order to avoid possible condensation, mold or odors
forming.
Attention:
In case of cellar installed along with kitchen furniture with a plinth, the cellar’s grill delivered with the appliance must be
removed / must not be installed and an integrated ventilation grill for the plinth must be ordered to the kitchen manufacturer.
The grill delivered with the appliance is only to be used when free standing.
When the grill has to be removed, please do not lay on the wine cellar because oil could go into the circuit and could cause
irreversible damage.
INSTALLING THE HANDLE
IMPORTANT: do not overtighten the screws
Locate the handle (1) over the pins (3) of the door and tighten the handle by screwing the allen key grub screws.
REVERSING THE DOOR SWING OF YOUR APPLIANCE
Should you desire to reverse the opening direction, please follow the instructions below.
Note: all parts removed must be saved to do the reinstallation of door.
