7
5.SETTING UP
5.1- STARTING THE DEVICE
First, plug in the power cord to a mains power outlet, and click the switch on the right. Press to turn on the radiator, ECO light turns on.
5.2- CONFIGURATION OF SETTING TEMPERATURE
Once the unit is ON, press to select the desired temperature. Depending on the temperature selected, light displayed is different; see
images below.
18 Grad
19 Grad
21 Grad
22 Grad
24 Grad
5.3 SELECT THE OPERATION MODE
There are 4 operating modes:
•
Manual.
•
Timer ON
OFF
•
Timer OFF
ON
•
Replay.
Manual Mode
The user determines the setpoint temperature.
To select temperature, press repeatedly until the light activates on the desired temperature (see figures 5.2).
Timer ON
OFF Mode
The device will work at the preset temperature as per user’s configuration
To select the temperature, press
Press
to select the operating time. By pressing
repeatedly, operating hours or a combination of operating hours will be selected.
E.g.
The unit is programmed at 21ºC during 5 hours.
To deactivate the timer function press
repeatedly until the time LEDs are deactivated
Timer OFF
ON Mode
The device will stop working as per user’s configuration.
On starting the device again, press to select the temperature to reach.
Press during 2 seconds to switch to OFF mode.
Press
to select the switch-off time of the device. Press and hold
repeatedly to select the operating hours or the combination of
operating hours of the device. E.g.
The device is disconnected during 5 hours
To deactivate the timer function press
repeatedly until the time LEDs are deactivated.
Replay Mode
Press to select the desired temperature.
Press
to select the operating cycle. By pressing it repeatedly, programmed hours or a combination of programmed hours will be
selected.
To select the replay mode, press
for a few seconds, time lights start to flash, replay mode is activated.
Programming time starts as soon as it is set. E.g.
The unit is set to connect and disconnect every 4 hours.
If it was set at 8 a.m., the heater works as shown below.
Press
once
to deactivate the replay mode.
Summary of Contents for OPTIPLUS 1600
