5
Power Pad
Turns air conditioner on and off. When turned on, the display will show the room temperature.
Display
Shows the room temperature or time remaining on the Delay timer. Shows the Set temperature while setting the tem-
perature in Cool or Energy Saver modes. The Set light will turn on while setting.
NOTE: The display will change to show the room temperature after settings have been made. To recall the Set tem
-
perature, press the Temp Increase ▲ or Decrease ▼ pads.
Temp Increase ▲ /Decrease ▼ Pads
Use to set temperature when in Cool or Energy Saver mode. The Set light will turn on while setting.
Delay Timer Increase ▲ (+) /Decrease ▼ (–) Pads
Each touch of the Increase ▲ / Decrease ▼ pads on the unit or the In / Decrease – pads on the remote control
will set the delay time when using the Delay 1–24hr timer ( ). The Set light will turn on while setting.
Fan Speed Pads
Use to set the fan speed to Low, Med, High or Auto on the unit. NOTE: On the remote control, use the fan speed In
-
/ Decrease – pads to set the fan speeds to Low, Med or High. Use the Auto pad to turn Auto fan on.
Mode Pad
Use to set the air conditioner to Cool, Energy Saver or Fan Only mode.
Delay Pads
Delay ON—When the air conditioner is off, it can be set to automatically come on in 1 to 24 hours at its previous mode
and fan settings. Delay OFF—When the air conditioner is on, it can be set to automatically turn off in 1 to 24 hours.
How to set:
Press the Delay 1–24hr pad on the unit or the pad on the remote control. Each touch of the Increase ▲/ Decrease ▼
pads on the unit or the In / Decrease – pads on the remote control will set the timer in 1-hour intervals. The Set
light will turn on while setting.
To review the remaining time on the Delay 1–24hr timer, press the Delay 1–24hr pad on the unit or the pad on the remote
control. Use the Increase ▲ / Decrease ▼ pads on the unit or the In / Decrease – pads on the remote control to
set a new time if desired. To cancel the timer, press the Delay 1–24hr pad until the light on the Delay 1–24hr pad goes
off.
1
2
5
6
3 4
7
7
4
6
5
3
4
5
5
1
1
2
3
4
5
6
7
OPERATING INSTRUCTIONS