Outdoor PIR Motion Sensor Camera 862EX
862EX is an outdoor passive infrared (PIR) motion sensor camera. It is capable of sending wireless signals and captured images
(picture quality of up to 640 x 480 pixels) to the Control Panel upon movement detection.
Featuring night illumination capability, with UV resistant housing, and waterproof to IP45 standard, 862EX is ideal for backyards,
lawns, gates, outdoor corridors and hallways.
The outdoor PIR Camera is designed to give a typical detection range of 10 meters when mounted at 2 meters above ground. It
provides pet-immunity up to 60 kilos with two selectable sensitivity levels to accommodate different environments.
862EX Series is compatible with repeaters/routers, the RF communication range can be further extended into hard-to-reach
areas. For the model designed with the digital proximity detector, the anti-masking feature allows for detection of any attempts to
blind the detector by placing objects in its field of view.
The 862EX Series includes the following models
:
862EX – PIR motion sensor camera with flash LED
862EX-AM – PIR motion sensor camera with flash LED and the digital proximity detector.
862EX-IL – PIR motion sensor camera with Infrared LED
Identifying the Parts
Front View Inside View
1. Digital Proximity Detector
The digital proximity detector (For 862EX-AM) is used to detect any masking (blocking) attempt by an intruder.
2. Flash LED / Infrared LED
The Flash LED (For 862EX & 862EX-AM) or Infrared LED (For 862EX-IL) delivers sufficient light for image capture under low
lighting condition.
3. LED Indicator (Red)
The LED indicator is used to indicate the system status.
4. IR Sensor
The sensor is intended to detect moving objects.
5. PIR Camera Lens
6. Test&Learn Button
-Press and hold the button for 3 seconds to send a learn code, and then release the button when Red LED lights up.
-Press the button once to enter test mode for 10 minutes.
-Press the button once to send a learn code to the repeater/router. (P5 models only)
7. Internal Tamper
1
