Walk Test
should be conducted to confirm proper operation and coverage of the PIR.
When learning the PIR Camera into a repeater/router, please press the Test button once (instead of pressing and
holding it for 3 seconds) to send a learn code. (P5 models only)
Edit PIR Camera Operation Area
Follow instruction below to change PIR Camera Area in the Control Panel
1) Use the panel Edit Device function to change PIR Camera area setting.
2) Press and hold the Test button for 3 seconds on the PIR Camera to send a signal to the panel, and then release
the button when the LED lights up.
Mounting & Installation Method
Mounting with mounting bracket:
The PIR Camera can be mounted on either a flat surface or in a corner situation with fixing screws, plugs, and the
mounting bracket provided.
The provided mounting plate has knockouts, where the plastic is thinner and can be broken for mounting purpose.
Two knockouts are for surface fixing and four knockouts are for corner fixing as shown in the picture.
To mount 862EX with mounting bracket:
1) Use the mounting bracket as a template to drill holes on the wall for plugs.
2) Push in the plugs and fix the mounting bracket on the wall with the screws.
3) Mount 862EX with the hooks of the mounting bracket latched on the back cover of the 862EX, and then push
downwards until you hear a click sound.
<
<
N
N
O
O
T
T
E
E
>
>
Please make sure the PIR Camera is properly hooked onto the mounting bracket, so that the internal tamper
switch is fully compressed.
Please avoid mounting the PIR Camera on uneven sufaces. If mounting in a corner situation on uneven
surfaces is still necessarey, you can attach the 4 adhesive foam spacers to the back of the mounting bracket to
provide stress relaxation.
→
Mounting with mounting bracket and rotating holder:
A rotating holder is provided as a user friendly mounting option
(optional item, sold separately)
. It is comprised of a base to fix
to surface, and a swivel ball to fix to mounting bracket and
4
