2) Fix the mounting bracket on the swivel ball with the fixing screw secured through the foolproof design hole.
3) Mount 862EX with the hooks of the mounting bracket latched on the back cover of the 862EX, and then push
downwards until you hear a click sound.
4) Rotate the swivel ball horizontally to adjust 862EX’s detecting angle. (When the angle adjusting screw is half
loosen, the swivel ball can still be rotated.)
5) When 862EX is rotated to a positon with desired detection coverage, you can lock the position by firmly tightening
the angle adjusting screw.
Installation Recommendations
It is recommended to install the PIR Camera in the following locations:
2M (measured from bottom of the camera) above ground level for best performance.
The operating temperature is -10
°
to 45
°
C.
In a corner for the widest view.
Where an intruder would normally move across the PIR Camera’s field of view.
A surface or corner where animals are inaccessible.
The PIR Camera has a detection range of 10M when mounted 2m above ground.
862EX Detection Range
6
