17
Step 1:
Click the Start button besides 94#
(Device) to enter learning mode, a
“Panel in learning mode. Please
press Device Button!” message will
pop up.
Step 2:
Press the learn button on the device
within 20 seconds.
Learning can only be completed
within the signal reception range of
CTC-1052-QT-DT35AW.
If no signal is received within 20
sec, CTC-1052-QT-DT35AW will
emit a long beep and automatically
return to Programming mode.
Step 3:
CTC-1052-QT-DT35AW will emit 2
beeps to indicate the device is
learnt-in successfully.
Adding a device for a second time is
prohibited unless it is removed from
the system first.
If
one long beep
is emitted instead
of 2 beeps, it indicates:
The device has already been
learnt-in.
When the 21
st
device is attempted
to learn-in.
Step 4:
Repeat steps 1-3 until all devices
are learnt-in.
Command 98
Factory Default Reset
To Reset CTC-1052-QT-DT35AW to factory
default settings, enter (
98
) and then (
#
).
After one short beep, continue by entering
(
) and then end with another (
#
), one
beep will be heard for termination.
Once the
Factory Default
Reset
is
executed, all the programmed data is
returned to its default value and all the
devices that have been learnt-in are
removed. You have to do the programming
and learn-in the device one by one again.
Command 99
Exit Programming Mode
Enter (
99
) and (
#
), after one short beep,
CTC-1052-QT-DT35AW
exits
the
Programming Mode and returns to idle
mode.
4.3. SMS Remote
Programming
CTC-1052-QT-DT35AW
can
be
remotely
programmed via SMS commands.
<NOTE>
Prior to procced, please be reminded to
change the language setting of your mobile
phone to English.
Step 1:
Use your handset and go into the SMS
edit screen.
Step 2:
Enter the
SMS keyword
(default is
PROG
).
Step 3:
Enter a
space
.
Step 4:
Enter the
access code
(default is
1111
as defined by
Command 40
).
Step 5:
Enter a
space
.
Step 6:
Enter the
programming command
.
Step 7:
Editing is complete; you may send to the
Control Panel.
<EXAMPLE>
<NOTE>
For a complete list of SMS commands,
please refer to section
4.3.1 CTC-1052-
QT-DT35AW
SMS
Remote
Programming Command Table
.
E.g. PROG_1111_TEL1:0227940001
PROG
SMS Keyword
__
Space
1111
Access Code
__
Space
TEL1
Telephone number 1
：
Colon
0227940001
Programming
data/option
