5.3. Learn Rule
You can enter the sensor RF code or ZigBee MAC address manually to assign area and zone
number to this sensor. Sensors learned with pre-assigned rule will be put under the area and
zone number you specified. This function does not work with Z-Wave devices and DECT device.
Step 1.
Click
Learn Rule
.
Step 2.
You will see the
Add Learn Rule
menu.
Step 3.
Select
Area
and
Zone
number for this device.
Step 4.
Select
RF
or
ZigBee
.
Step 5.
Key in the RF code or ZigBee MAC info
Step 6.
For ZigBee device, select a ZigBee Device Type
Step 7.
Enter a preferred name for sensor (up to 31 letters or numbers).
Step 8.
Press “OK” to save.
Step 9.
If the process is successful, the screen will display “
Updated Successfully
.” You can
then check, edit or delete the rule under the
Learn Rule
menu.
Step 10
Repeat the steps to add more rules.
23
