7.2. Network
This is for you to program the Network for IP connection.
Obtain an IP address automatically (DHCP)
If DHCP is selected, the Network will obtain an IP address automatically with a valid
Network DHCP Server. Therefore, manual settings are not required.
This is only to be chosen if your Network environment supports DHCP. It will automatically
generate all information.
Use following IP address
You can also enter the Network information manually for IP Address, Subnet Mask,
Default Gateway, Default DNS 1 and Default DNS 2.
Please make sure that you have obtained all required values according to your Network
environment. Please contact your network administrator and/or internet service provider
for more information.
DNS Flush Period
You can set the system to clear current DNS resolution records for all entered URL
settings (Reporting, Upload, XMPP…etc.) after a set time period. The system will then
resolve the Domain Name again and acquire new IP address for the URL settings. This
function is disabled by default.
47
