8.2. Home Automation
It is used to set Home Automation rules to control sensors and home appliances. You can set up
to 100 rules.
Step 1.
Click on
Edit
.
Step 2.
Select an operation area.
Step 3.
Set a rule condition.
Step 4.
Set a rule schedule.
Step 5.
Select the corresponding action rules in the
Execution
field.
Area
Select an opeartion area.
Rule Condition
The rule condition determines under which circumstances the rule should be activated.
Empty :
When set as
Empty
, the system will follow the schedule time and execution
rule to respond accordingly.
Trigger Alarm
: When set as
Trigger Alarm
, if the specified alarm event
(Burglar/Some/Medical/Water/Silent Panic/Panic/Emergency/Fire /CO Alarm) is
triggered, the rule will be activated according to rule schedule and execution setting.
Mode Change
: When set as
Mode Change
, when the system enters specified mode,
the rule will be activated according to rule schedule and execution setting.
51
