8.15. Factory Reset
Yan can clear all programmed parameters in the Control Panel and reset it to Factory Default.
Once the
Factory Reset
is executed, all the programmed settings will returned to its default
value, and all the learnt-in devices will be removed. You will need to restart the programming
and learning process again.
Remote Reset
Step 1.
Tick the
Kept current network setting
or
Kept current device list
box to keep the
current Network settings. Otherwise, the system will reset its value back to factory
default. Tick the
Kept current device list
box to keep the current learnt-in devices.
Otherwise, the system will reset its value back to factory default.
Step 2.
Press
Yes
to continue the Reset procedure.
Step 3.
Wait for 1 min and do NOT power off during this time.
Step 4.
Once reset is complete, it will automatically reboot the main unit.
72
