27
Sensor has expired.
This function is only used when a fall is detected, if the Active Button
on Mobile Lite or the Active Button of the learnt-in Fall Sensor is
pressed to activate alarm, normal guard time is used instead.
Speech Report Ack:
Use this option to set how Mobile Lite should determine whether
Speech Reporting is successful.
When set to
“Off Hook”. Mobile Lite will consider the Speech Report
successful when the call recipient picks up the call.
When set to
“Any DTMF”. Mobile Lite will only consider the Speech
Report successful until the call recipient has entered any DMTF
command.
Two-Way Timer:
When Mobile Lite makes Speech Report or answer an incoming call.
The duration of Two-way communication is conditioned by the
Two-Way Timer setting.
Pressing any DTMF key during Two-way communication (except
DTMF 9) will reset the communication time to the preset duration.
Callback Timer:
After an alarm is reported to all the reporting destinations and at
least one of them is successful, Mobile Lite will start a waiting period
(callback time) to auto answer any incoming calls.
When Mobile Lite receives an incoming call within the callback timer,
it will auto answer the call (after the first ring) and wait for the Access
Code (default: 1111) and
#
key entry within 15 seconds.
When the correct Access Code is received, Mobile Lite will open a
full-duplex Two-way communication. Use DTMF commands to
switch communication type.
The Access Code (and the # key) must be entered within 15 seconds
or the system will disconnect the call automatically.
Press DTMF (
9
) on Mobile Lite to terminate the call.
When callback timer is up, the system will automatically exit the
waiting mode and return to idle mode.
Callback Check Access code:
When set as
“Disable”, Mobile Lite will auto answer an incoming call
within the callback timer and open a full-duplex Two-way
communication without checking the Access Code (default: 1111).
