40
6.5. Alarm Activation
When an alarm is activated by pressing the Active Button of Mobile Lite or
the learnt-in RF device (WTR, Fall Sensor or PB), or pulling the cord of
PCU, Mobile Lite will emit a voice prompt
“Emergency Call was pressed”
as it enters guard time.
When a fall is detected from the learnt-in Fall Sensor or the Mobile Lite
itself (R15, R18), Mobile Lite will enter guard time fall sensor and begin
report when guard time fall sensor expires.
If Mobile Lite is activated while having a Cellular Network fault (Amber
LED flashes once every 3 seconds), it will emit 3 beeps as a local
warning.
If there are no report destinations programmed, Mobile Lite will not report
upon alarm activation and will emit 1 beep as a reminder.
Mobile Lite will also report its location along with the alarm report (please
refer to
6.3. GPS/Wi-Fi Locate Function
) provided the programmed
report method(s) supports location report.
Guard Time
After Mobile Lite is activated, it will begin counting down the Guard Time
and begin reporting after Guard Time has expired. Mobile Lite will
continuously play voice prompt
“Help call in progress” during guard time.
During guard time, the user can cancel the alarm reporting by pressing the
Active Button of Mobile Lite for 5 seconds or pressing the Active Button of
the learnt-in RF device for a duration determined by the device (please
refer to the device user manual). If alarm is canceled, Mobile Lite will play
voice prompt
“Help call cancelled”.
Alarm cannot be cancelled after guard time has expired.
Guard Time Fall Sensor
When a fall is detected from the learnt-in Fall Sensor or the Mobile Lite
itself, Mobile Lite will enter guard time fall sensor.
If a false alarm is triggered by Fall Detection, it can be canceled within the
guard time fall sensor period by pressing the Active Button of Mobile Lite
for 5 seconds or pressing the Active Button of the learnt-in RF device for a
duration determined by the device (please refer to the device user
manual).
After the Guard Time Fall Sensor has expired, Mobile Lite will begin report,
the alarm event cannot be cancelled after Guard Time Fall Sensor has
expired.
This function is only used when a fall is detected, if the Active Button on
Mobile Lite or the Active Button of the learnt-in Fall Sensor is pressed to
activate alarm, normal guard time is used instead.
