1
Repeater (RP-29)
The Repeater is designed to increase the effectiveness and versatility of the alarm system. It is a
device that makes your system more powerful by increasing the maximum possible distance
between the Main Unit (Control Panel) and the Devices.
Identifying the Parts
1. Power LED (Green)
On
– Powered by a Power Adapter or
Rechargeable Battery
Flash
– Rechargeable Battery low on
power
2. Mode LED (Yellow)
On
– The Repeater is in Learning Mode
(Panel) or Clear Mode
Flash
(1 flash every second) – The
Repeater is in Walk Test Mode
Slow Flash
(1 flash every 2 seconds) – The
Repeater is in Learning Mode (Device)
3. Transmission: Receive LED (Blue)
The Blue LED lights up when the Repeater
receives a signal transmission
4. Transmission: Transmit LED (Red)
The Red LED lights up when the Repeater
transmits a signal.
5. Functional Switch Block
6. Test Button
7. Battery Switch
8. Removable Cover
9.
Tamper Switch
10.
Mounting Hole
11.
DC power jack
12.
Mounting Bracket
