28
6. Network Setting
6.1. Network
The following is displayed when you click on “
Network
” under the “
Network Setting
”
option:
Obtain an IP address automatically (DHCP)
If DHCP is selected, the Network will obtain an IP address automatically with a valid
Network DHCP Server. Therefore, manual settings are not required.
This is only to be chosen if your Network environment supports DHCP. It will automatically
generate all information.
Use following IP address
You can also enter the Network information manually for IP Address, Subnet Mask,
Default Gateway, Default DNS 1 and Default DNS 2.
Please make sure that you have obtained all required values according to your Network
environment. Please contact your network administrator and/or internet service provider
for more information.
DNS Flush Period
You can set the system to clear current DNS resolution records for all entered URL
settings (Reporting, Upload, XMPP
…etc.) after a set time period. The system will then
resolve the Domain Name again and acquire new IP address for the URL settings. This
function is disabled by default.
Web Server
Set the port used to access the IP Camera
’s webpage. The IP Camera will reset upon
changing the web server port. After reset is complete, the IP Camera will switch to using
the new port number when opening its webpage.
Summary of Contents for VST-1818
Page 1: ...September 30 2017 ...
