ClimaxDigital VCAP301/VCAP302/VCAP303 User Manual V1.0
ClimaxDigital
2
•
Set-top
box
•
Game
player
•
Any device that provides an analog video signal
5. Quick Start Guide
Step 1
: Insert the CD-ROM to install the drivers and application software.
Step 2
: Connect ClimaxDigital USB 2.0 Video Capture to your analog video source and then to a free USB 2.0
port on your computer.
Step 3
: Launch ShowBiz software to capture video and audio onto your computer.
Step 4
: Edit the captured video files with ShowBiz software.
Step 5
: Convert the captured video files with ShowBiz software.
Step 6
: Transfer the captured video to your iPod, PSP, 3GP Mobile Phone and other video devices or upload
the captured videos directly to YouTube.
6. Connection Guide
•
Please make sure you connect the
ClimaxDigital
USB 2.0 video capture to the OUTPUT port of your
video source device. USB video capture does NOT work with the video input port on your video source
device.
•
If the video OUTPUT port on your video source is S-Video female, then you need to get S-VHS
(S-Video) extension lead (male to male). If the video OUTPUT port on your video source device is
composite AV (Yellow, red, white) female, then you need to use the included RGB to RGB lead (male to
male). If your video port is SCART, then you will need SCART to RGB convertor or cable.
•
Please be advised that you ONLY need one of the following connections
1)Composite AV (yellow, red, white)+audio
2)S-Video +audio
Please do NOT connect AV and Svideo at the same time. You only need one of them.
6.1 Composite-Video
Connect the yellow composite video input to the corresponding output of your video source. Also connect the
RCA audio inputs with the audio outputs of the source device. You need to use the included composite AV cable.
