NO!
1
2
1
2
www.climbingtechnology.com
- 6 -
DRAWINGS
| DISEGNI | DESSINS | DRAWINGS | DIBUJOS
WEB_IST12-2D651CT rev.3 07-13
9 | DYNAMIC MODE - BELAYING THE LEADER
Attention!
A safety check between the climber and the belayer is essential before start climbing!
During belaying at all times hold firmly the free end of the rope in your hand!
9.1
GIVING SLACK
9.2
TAKING UP SLACK
9.3
ARRESTING A FALL
With one hand, bend the
free end of the rope, with
the other pull and feed the
climber’s rope through the
device.
With one hand pull and
feed the free end of the
rope, with the other pull the
climber’s rope towards the
device.
Hold the free end of the
rope firmly in one hand and
pull it downwards.
Don’t
hold the device in your
hands!
8 | DYNAMIC MODE - INSTALLATION AND SETUP
This mode is ideal for use on traditional climbing routes or adventure terrain with nuts, friends, pitons
etc.
A safety check between the climber and the belayer is essential before start climbing!
8.1
SETUP
8.2
SETUP
8.3
SETUP
8.4
SETUP IS OK!
Connect the
karabiner to the
belay loop of
the harness.
Insert the loop of the rope
in the slot B, referring to
symbols 1-4 on the device.
Insert the karabiner at right
angles to the lever H in the
hole G with the rope inside.
Close the karabiner gate!
The system is OK.
From now on
always hold
firmly the free end of the
rope in your hand!
