“Automatic function” key
The automatic mode function can be activated or deactivated by pressing this key. If the symbol lights up,
automatic mode is active.
In automatic mode, the fan speed is adjusted automatically to the current air quality. The better the air
quality, the lower the fan speed.
The current air quality can be determined by the LED indicator (Fig. 4). The following applies:
LED colour
Blue
Green
Orange
Red
Air quality
Very good
Good
Risky
Hazardous to
health
Fan speed
Sleep
I (low)
II (medium)
III (high)
"Unit lighting" key
The air purifier lighting can be switched off by
pressing this key. Pressing any other key (except
on/off) activates the lighting.
“Indicator for filter change”
If the “Filter change” symbol lights up, the filter
must be checked for contamination and cleaned if
necessary. We urgently recommend replacing it if it
is heavily soiled.
The durability of the filters is heavily dependent
on the air quality in the room and the period of
use. A humid environment lowers the service
life of the filter!
“Sleep function” key
Pressing this key activates/deactivates the sleep
function. If the sleep function is active, the bright-
ness of the lighting is reduced to 50%. The fan
speed is also reduced to a minimum.
The LED colour indicator of the air quality corre-
sponds to the current condition of the room air.
The air purifier has a memory function for the
operating settings. If the unit is switched off and
on again, the device automatically adopts the
last settings used.
2
1
3
Fig. 4: LED colour indicator
1: blue
2: green
3: red
CLIMIA
9
