Clipper ECHO SOUNDER, Manual

CHANGING DEPTH ALARM SETTINGS

At any time during normal operation of the unit, it is a simple matter
to set an alarm for too shallow and another alarm for too deep. To
set up the deep alarm depth (below which an alarm will sound),
press the DEEP button to show the present deep alarm setting.
The display shows the word DEEP, and the present deep alarm
depth. The factory pre-set deep alarm setting is 50 metres. Press
the DEEP button to make the deep alarm depth deeper, and the
SHALL button to make the deep alarm depth shallower.

If the SHALL button is pressed steadily, the setting reduces
continually in 1.5 foot or 0.5 metre steps. If the DEEP button is
pressed steadily, the setting increases in 1.5 foot or 0.5 metre
steps. The step size depends on whether the unit is set to measure
feet or metres.

If the deep alarm depth setting reaches 99.5m, or attempts to pass
the shallow alarm setting, it stops changing. When the desired
alarm depth is set, press ENTER to store the deep alarm depth
setting. The display returns to measuring depth.

Figure 6 - Selecting Deep or Shallow Alarm Setting

DEEP

ENTER

SHALL

DEEP

ILLUM

METRES

SHALLOW

ENTER

SHALL

DEEP

ILLUM

METRES

9