A low profile through table shock mount microphone base fitted with a flip cover to conceal the
connector when closed.
Designed for remote switching.
Low profile table mounted microphone base.
Requires a minimum table thickness of 25mm (1”)
Includes a concealed flap to allow the table to be
used for other purposes.
Built in shock mount to eliminate surface bound
noise.
Fitted with momentry (PTT) or latching switch.
Bi-colour common anode LED to confirm status
Housing PPA-RF for use with Clockaudio mics C
3100, C 310R, C 313/SR, C 314/SR.
Terminated with RJ 45 connector and supplied
with RJ 45 coupler which allows connection via RJ
12 or RJ 45 plug back to dsp.
Switch connections
Architects and Engineers Specifications for Mi-
crophone Shock Mount SM 80S-RF
It shall come complete with a dedicated phan-
tom power adaptor designed to power the C
3100 miniature gooseneck microphones termi-
nated with Tini Q 3 pin connectors. The Phan-
tom power adaptor shall accept 9 to 48 volts DC
and have impedance of 200 ohms. The phan-
tom power adaptor shall also include filters,
which shall eliminate all GSM frequencies from
800-1200 MHz and be terminated with a male 3
pin XLR. The microphone shock mount shall be
available in satin Nickel or Black Nextel finishes.
The through table microphone shock mount
shall be a Clockaudio SM 80S-RF.
Applicable for Clockaudio microphones only
3 Pin Tini Q Wiring 3 Pin Male XLR Wiring
PIN 1 Phase – PIN 1 Ground
PIN 2 Phase + PIN 2 Phase +
PIN 3 Ground PIN 3 Phase
www.clockaudio.com
