ON/OFF:
Press this button to switch on/switch off HDML-Cloner Box Turbo.
5V/2A: Plug the power adapter into this socket and power on HDML-Cloner Box
Turbo.
3. IN:
Connect an HDMI cable between the HDMI source device and HDML-Cloner Box Turbo.
OUT: Connect an HDMI cable between HDML-Cloner Box Turbo and TV.
4.
5. Storage: Insert the USB flash drive or mobile hard disk and record videos to this
storage medium.
6. REC/STOP and 1080p/720p: Press this button to start or stop recording. If you press
and hold this button for a few seconds, it will work as a switch between 720p and 1080p.
7. MIC: Insert the microphone plug into this jack to input voice.
8. TO PC: Connect the Micro-USB to USB cable between PC and HDML-Cloner Box Turbo
1.
2.
for recording videos to PC. This function must be realized together with HDML-Cloner Pro
Helper.
3
Summary of Contents for HDML-Cloner Box Turbo CA-988BT
