Outside
Inside
Note slope of hole through wall
Hole diameter: 29-30mm
29-30mm
6
Installation 1 – Hose Through The Wall To Outside
Cut a hole in the wall approximately 29–30 mm
in diameter. Ensure the hole allows the hose to
slope downwards slightly.
Feed the hose through the hole and place the cap
over the end of the hose.
Installation
Space-filler
Link
Hose holder
Double-sided tape
Installation 2 – Hose Through The Window To Outside
The unit comes with a window spacer kit which allows the hose to pass through a partially open window.
Assemble the pieces ensuring the piece
with the hose cutout is at the bottom.
Adjust the main blanking piece so the
assembly takes up the full height of the
window frame.
Secure the filler assembly to the window
frame using the double sided tape.
Fit the wedge to secure the window
Wedge
Position the wedge to help
secure the window.
Finally, feed the hose through the hole and ensure the cap is in place at the end of the hose.
Summary of Contents for CLOey
Page 16: ...cl clo2 0614...
