manualshive.com logo in svg

ClosetMaid Maxload 34380, Installation Instructions Manual

Get organized with the ClosetMaid Maxload 34380. This versatile shelving system can hold up to 150 pounds per shelf, making it perfect for storing heavy items. Ensure easy assembly with the included Installation Instructions Manual. Download the manual for free from 88.208.23.73:8080 to get started on your organization project.

Share
Download
background image

© 2020 ClosetMaid LLC | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com

1

4380 & 34380 

11/19

01-10146-00

6 FT - 10 FT ADJUSTABLE GARAGE ORGANIZER

INSTALLATION INSTRUCTIONS

What you will need:

•  Please read all instructions carefully.
•  Familiarize yourself with all parts (see “PARTS INCLUDED WITH KIT”) and check quantities.
•  Follow all safety precautions (see “SAFETY PRECAUTIONS”).

•  Follow all manufacturer installation requirements in order to comply with the 

advertised weight load specifications.

BEFORE BEGINNING

Primary Configuration

*Static Load Evenly Distributed. Must be installed per manufacturer’s 

specifications or weight load capacity does not apply.

Whichever load reaches 

capacity first:

Maximum Shelving Load*: 100 lbs/ft 
Maximum 40 in. Hang Track Load*: 700 lbs
Maximum System Load*: 1,400 lbs

(See pages 6)

Primary Configuration Kit Capacity

Summary of Contents for Maxload 34380
















Reviews:

No comments

Related manuals for Maxload 34380

EggTronic EINOVA MUNDUS PRO Manual preview
EINOVA MUNDUS PRO
Brand: EggTronic Pages: 2

Brands by name

Popular brands

Load more brands