Side entry pipes
Installation on a plinth
1
With a sharp implement, remove the side
panel screw covers.
2
Remove the screw and set aside.
3
Remove the side panel.
4
Install the side entry pipe scribing the side panel to suit each location,
refit the side panel and screw covers on completion.
1
Using the template provided, locate,
mark and drill four holes for the plinth in
the floor to best suit the intended fixings
to be used for the application.
2
Secure the plinth to the floor using all four
fixing points, use suitable fixing for the
application, prior to installing the Closomat.
3
Locate the Closomat over the plinth.
4
Using ALL four blocks anchor the Closomat to
the plinth.
9
