USER MANUAL :
DOCUMENT NAME
To make a connection, select the device from the list and
device in the list will initiate a connection immediately.
Once the Bluetooth connection has been established, Cloudworks will automatically activate the correct configuration
screen needed for each device type. This device will immediately be placed into Command Mode and the current setup
data retrieved and displayed on the right hand screen.
Data update commands are sent to the device only after the parameter setup field has been
while adjusting a parameter in its input box, no commands are sent to the logger. Once you have completed entering the
field and leave it for the next function, only then will the command be sent.
Datalogging functions are suspended while a
the settings can be reread by pressing the 'Get Current Setup' button in the
MANUAL : CDS551 CIRRUS MODBUS LOGGER
NAME
CLASSIFICATION
DATE
PAGE
To make a connection, select the device from the list and press the 'Connect' button. Alternatively, double clicking on the
device in the list will initiate a connection immediately.
nce the Bluetooth connection has been established, Cloudworks will automatically activate the correct configuration
needed for each device type. This device will immediately be placed into Command Mode and the current setup
data retrieved and displayed on the right hand screen.
Data update commands are sent to the device only after the parameter setup field has been left. What this means is that
while adjusting a parameter in its input box, no commands are sent to the logger. Once you have completed entering the
field and leave it for the next function, only then will the command be sent.
uspended while a logger is in Command Mode
. At any point, with the logger
the settings can be reread by pressing the 'Get Current Setup' button in the top menu.
PAGE
the 'Connect' button. Alternatively, double clicking on the
nce the Bluetooth connection has been established, Cloudworks will automatically activate the correct configuration
needed for each device type. This device will immediately be placed into Command Mode and the current setup
left. What this means is that
while adjusting a parameter in its input box, no commands are sent to the logger. Once you have completed entering the
logger in Command Mode,
