USER MANUAL :
DOCUMENT NAME
An example of a submersible 4-20mA level pressure sensor tha
Loop Low Value = 0
Loop High Value = 10
Loop Units = metres
Next are the 'General Setup' parameters. These are parameters that are used for the general descriptions and applications
of the logger.
Very important here is the 'Vendor Code'. The
server will automatically populate the database that is associated with a specific
Vendor Code assigned to it. Data is matched between these systems using that code. This code is also used to separate
communications between different vendors, preventing the cross accessing of
Code is assigned to the relevant subsystem by the a
The description is a simple string of data that is stored by the logger and used to identify that logger in simple terms. He
it is best to use wording that might explain something about where this logger has been applied.
Application types are explained in detail earlier in this document. To select an application type, simply click the dropdown
arrow on the right of the entry field and select the application type you wish
Since this logger has no onboard GPS, co-ordinates are recorded in the latitude and longitude fields which will be sent
through to the database during a reload device configuration event.
When using a simcard to connect to a GSM network, the
need from you in order to connect to their network. These are sometimes not necessary as the card will automatically
connect but most will require them. The parameters are the APN Name, User
MANUAL : CDS551 CIRRUS MODBUS LOGGER
NAME
CLASSIFICATION
DATE
PAGE
20mA level pressure sensor that reads up to 10 metres.
Next are the 'General Setup' parameters. These are parameters that are used for the general descriptions and applications
Very important here is the 'Vendor Code'. The Cloudworks System supports multiple databases. What this means is that the
server will automatically populate the database that is associated with a specific logger. Each database and
ssigned to it. Data is matched between these systems using that code. This code is also used to separate
communications between different vendors, preventing the cross accessing of loggers by unauthorised users. The Vendor
subsystem by the administrator during the creation of the database on the server.
The description is a simple string of data that is stored by the logger and used to identify that logger in simple terms. He
something about where this logger has been applied.
Application types are explained in detail earlier in this document. To select an application type, simply click the dropdown
arrow on the right of the entry field and select the application type you wish to apply.
ordinates are recorded in the latitude and longitude fields which will be sent
through to the database during a reload device configuration event.
When using a simcard to connect to a GSM network, there are a couple of parameters that your GSM service provider will
need from you in order to connect to their network. These are sometimes not necessary as the card will automatically
connect but most will require them. The parameters are the APN Name, Username and Password.
PAGE
Next are the 'General Setup' parameters. These are parameters that are used for the general descriptions and applications
supports multiple databases. What this means is that the
. Each database and logger has a
ssigned to it. Data is matched between these systems using that code. This code is also used to separate
s by unauthorised users. The Vendor
of the database on the server.
The description is a simple string of data that is stored by the logger and used to identify that logger in simple terms. Here,
Application types are explained in detail earlier in this document. To select an application type, simply click the dropdown
ordinates are recorded in the latitude and longitude fields which will be sent
re are a couple of parameters that your GSM service provider will
need from you in order to connect to their network. These are sometimes not necessary as the card will automatically
