background image

USER MANUAL : 

 

DOCUMENT NAME

1

 

CDS551 CIRRUS MODBUS LOGGER

1.1

 

Introduction 

 

The Cirrus Modbus logger is a robust, sophisticated 
making it ideal for a large number of measurement applications
 
Communication to your own server and database can be achieved 

on these servers is supplied free of charge. 
setup  without  the  need  for  a  complicated  se
supplied  free  of  charge  to  allow  clients  to  manage  their  own  networks  and  data.  There  are  no  monthly  charges  for 
collecting and hosting data as the client can provide this service themselves

 
 

1.2

 

Features 

 

 

Uses  GPRS/EDGE/LTE/4G  technology. 
world will soon no longer be supporting older GPRS/3G technologies, rendering these legacy dataloggers obsolete. 

This has already started happening in many countries around the world.

 

Bluetooth interface - setup and manual data

the need for cables that invariable fail during continuous use. 

 

Optional external power operation 

 

Uses standard off-the-shelf alkaline batteries. This logger uses

excess of 5 years under normal usage. Many other loggers use 
obtain. Other problems involving lithium batteries are the restrictions when shipping using airfreight. All 
batteries need to be shipped as hazardous cargo that is becoming increasingly difficult to achieve as many airlines 

are no longer allowing these batteries on their aircraft. 

 

Onboard Modbus/RS485  interface. The Modbus/RS485 interface  can be  used 

sensing equipment. This port is also well protected against large voltage transients. 

 

Isolated 4-20mA interface. Used for any sensing device with a 4

MANUAL : CDS551 CIRRUS MODBUS LOGGER 

NAME 

CLASSIFICATION 

DATE 

PAGE

LOGGER 

logger is a robust, sophisticated LTE/4G GSM logger/controller with a wide range of input capabilities, 

measurement applications. 

and database can be achieved via the internet or a private APN. 

servers is supplied free of charge. The Cirrus Modbus Logger has been designed to allow for easy installation and 

setup  without  the  need  for  a  complicated  server  infrastructure.  Setup  and  management  software  (CloudWorks)  is 

allow  clients  to  manage  their  own  networks  and  data.  There  are  no  monthly  charges  for 

collecting and hosting data as the client can provide this service themselves. 

GPRS/EDGE/LTE/4G  technology.  4G  has  become  essential  as  many  cellular  network  providers  around  the 

world will soon no longer be supporting older GPRS/3G technologies, rendering these legacy dataloggers obsolete. 

This has already started happening in many countries around the world. 

setup and manual data collection can be achieved through the Bluetooth interface negating 

the need for cables that invariable fail during continuous use.  

 with battery failover.  

lkaline batteries. This logger uses 3x standard D Cell alkaline batteries that 

excess of 5 years under normal usage. Many other loggers use lithium batteries that are expensive and difficult to 

ithium batteries are the restrictions when shipping using airfreight. All 

batteries need to be shipped as hazardous cargo that is becoming increasingly difficult to achieve as many airlines 

are no longer allowing these batteries on their aircraft.  

Modbus/RS485 interface. The Modbus/RS485  interface can  be used on a large  number applications or 

sensing equipment. This port is also well protected against large voltage transients.  

20mA interface. Used for any sensing device with a 4-20mA output.  

 

PAGE 

GSM logger/controller with a wide range of input capabilities, 

the internet or a private APN. The software running 

Logger has been designed to allow for easy installation and 

anagement  software  (CloudWorks)  is  also 

allow  clients  to  manage  their  own  networks  and  data.  There  are  no  monthly  charges  for 

network  providers  around  the 

world will soon no longer be supporting older GPRS/3G technologies, rendering these legacy dataloggers obsolete. 

collection can be achieved through the Bluetooth interface negating 

3x standard D Cell alkaline batteries that can last in 

ithium batteries that are expensive and difficult to 

ithium batteries are the restrictions when shipping using airfreight. All lithium 

batteries need to be shipped as hazardous cargo that is becoming increasingly difficult to achieve as many airlines 

n a  large number applications or 

Summary of Contents for CDS551































Reviews: